Showing posts with label Body Repair Manual. Show all posts
Showing posts with label Body Repair Manual. Show all posts

Sunday, 11 October 2009

Free eBook Body Repair Manual.pdf for 1998-2002 Buick Century/ Oldsmobile Intrigue

This Collision Repair Issues of 1998-2002 Buick Century/ Oldsmobile Intrigue describing originally issued for Collision Repair Issues by GM. Table of contents:

* Panel Identification
* Radiator Support Assembly
* Front Upper Rail
* Front Wheelhouse Assembly
* Front Lower Rail
* Door Frame Opening
* Door Service
* Roof Panel
* Quarter Panel
* Rear Outer Wheelhouse
* Rear Rail Assembly
* Rear Floor
* Rear End Panel Assembly
* Body Dimensions

Download free 1998-2002 Buick Century/ Oldsmobile Intrigue Collision Repair Issues.pdf (44 pages pdf).
READ MORE - Free eBook Body Repair Manual.pdf for 1998-2002 Buick Century/ Oldsmobile Intrigue

Free eBook Body Repair Manual.pdf for 2001 Oldsmobile Aurora/ 2000 Pontiac Bonneville/ 2000 Buick LeSabre

This body repair manual of 2001 Oldsmobile Aurora/ 2000 Pontiac Bonneville/ 2000 Buick LeSabre to describe step by step when you want to change body exterior of your vehicle. The 2000 Pontiac Bonneville which engine 3.8L Series II L36 V6; 3.8L Series II L67 V6; 4.6L LD8 Cadillac V8, transmission: 4-speed 4T65-E A/T; 4-speed 4T65E-HD A/T; 4-speed 4T80-E A/T. 2001 Oldsmobile Aurora offered which in two engines type: 3.5 L LX5 V6 and 4.0 L L47 V8. The 2000 Buick LeSabre uses engine 3.8L series II Buick 3800 V6 and 4 speed 4T65-E automatic transmission. Table of contents:

* Front Wheelhouse Replacement
* Front Lower Rail Sectioning

Sectioning procedures have been developed to help simplify repair of the lower rails provided the majority of damage can be returned to factory specifications. This allows technicians to repair the damaged front section without the need for a complete rail replacement.
* Outer Door Frame Sectioning
The full body side outer panel comes as a one-piece assembly and can be replaced at factory seams. Any one of these procedures can be performed separately, or in any combination, dependent upon the extent of damage to the vehicle. Sectioning must take place in specified areas only (Fig. 3-8).
Left and right service parts are structurally identical but have varied service slot placement in mid rocker areas. Remove front and rear glass when sectioning front pillar and quarter panel.
* Outer Front Pillar Sectioning
* Outer Center Pillar Sectioning
* Quarter Panel Sectioning
* Inner Door Frame Sectioning

The full body-side inner panel (Fig. 3-23) comes as a one-piece assembly and can be replaced at factory seams after removal of outer panel, roof and glass. Any one of these procedures can be performed separately, or in any combination, dependent upon the extent of damage to the vehicle. Left and right service parts are structurally identical but have varied service slot placement in midrocker areas. Remove front and rear glass when sectioning front pillar and quarter panel.
* Inner Front Pillar Sectioning
* Inner Center Pillar Sectioning (With Outer Panel Removed)
* Full Outer Wheelhouse Sectioning
* Floor Replacement - Rear
* Rail Replacement - Rear

The rear rails are available as a complete assembly. Each assembly consists of an outer panel, two inner reinforcements and all necessary component mounting brackets (Fig. 3-32).
The outer panel and rear mounting brackets are also available separately to facilitate sectioning.
Additionally, there is a crossbar that connects the two rear rails for added strength and rigidity
* Roof Panel Replacement
* Underbody Dimensions
* Body Side Dimensions - 2001 Aurora
* Body Side Dimensions - 2000 Bonneville
* Body Side Dimensions - 2000 LeSabre


Download free 2001 Oldsmobile Aurora/ 2000 Pontiac Bonneville/ 2000 Buick LeSabre Body Service Manual.pdf (25 pages pdf).
READ MORE - Free eBook Body Repair Manual.pdf for 2001 Oldsmobile Aurora/ 2000 Pontiac Bonneville/ 2000 Buick LeSabre

Saturday, 10 October 2009

Free eBook Body Repair Manual.pdf for 2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada

This body repair manual of 2002-2004 S/T Sport Utility from General Motor’s including Chevrolet Trail Blazer, GMC Envoy and Oldsmobile Bravada. The General Motor’s 2002-2004 S/T Sport Utility offer's engine a Vortec 4200 engine or LL8, the first Atlas engine. Table of contents:

* Front FrameM
The re-designed frame assembly for the new S/T Utility is a mild, steel hydroformed frame assembly. A front frame service section consisting of the left and right frame ends, body, and radiator support mounting brackets and front connecting cross tube is available.
* Radiator Support Assembly
The radiator support assembly is made from mild steel hydroformed tube which is welded to the front structure. The Radiator Support Assembly is serviced as a complete assembly. The bolt-on portion of the upper tie bar (1) as well as the left and the right fascia support brackets (2) are a part of the radiator assembly. If the damage is limited to these parts, they can be ordered and replaced individually. Replacement of the radiator support assembly requires removal of the upper fender rails. Upper fender rail service extensions (3) are included with the radiator support assembly for efficient installation. If the damage permits, locate and cut off the front portion of the upper rails along the die mark indicators and install the replacement upper fender rail service extensions. This procedure must be performed on both sides of the vehicle. Left side only is shown.
* Wheelhouse Extension Removal & Installation
* Upper Fender Rail Removal & Installation
* Upper Fender Rail Bracket
* Hood Hinge Bracket
* Windshield Pillar Sectioning

The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Front Lower Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
* Front Lower Pillar Sectioning
The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
* Center Pillar Sectioning
The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Front Lower Pillar Sectioning, Windshield Pillar Sectioning, Rear Pillar Sectioning, and Rocker Sectioning.
* Rear Pillar Sectioning
The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to the Front Lower Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
* Rocker Panel Sectioning
The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Front Lower Pillar Sectioning.
* Body Side Hinge A Pillar & B Pillar
* Door Side Hinge
* Quarter Outer Sectioning
* Rear Outer Wheelhouse
* Extension Outer Rear Wheelhouse
* Quarter Lower Filler
* Roof Outer Panel
* Dimension: Engine Compartment, Body Side, Rear Door Opening, Frame Dimension
* Chevrolet Trail Blazer Panel Identification
* GMC Envoy Panel Identification
* Oldsmobile Bravada Panel Identification


Download free 2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada Body Repair Manual.pdf (74 pages pdf file).
READ MORE - Free eBook Body Repair Manual.pdf for 2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada

Tuesday, 25 August 2009

Download Free 1996-2008 GMC Savana/Chevy Express Collision Body Repair Issues Manual.pdf

This body repair manual of 1996-2008 GMC Savana/Chevy Express describes incorporates picture, schemes, tables and descriptions on repairing the body of the GMC/Chevy Vans. GMC Savana and Chevrolet (Chevy Express) are General Motor’s full size vans that were built to replace the GMC Vandura and Chevy Van in 1996. Powered by V6 engine from 4.3L to 6.6L Diesel with a large and spacious body make these vans are very popluar as a work vehicle. It also available as a passenger van (with seating up to 15 passengers - depending on the model). Later in 2008 the E85 Flexfuel Vortec 5.3L V8 also was offered to empower the 2008 Express 1500 Work Van and Passenger Van, after Duramax 6.6L Diesel engine added in 2006 (as option). Table of contents:

* Panel Identification
* Radiator Support Assembly
The radiator support assembly is made of a composite material (SMC) to reduce weight and simplify installation procedures. The radiator support bolts on and is positioned by tabs which are located into holes in the front-end lower tie bar . A steel reinforcement extends across the upper portion. This reinforcement is part of the assembly or available separately. It is attached to the radiator support by 14 rivets.
* Front Inner Fender
The front inner fender may be serviced as a complete component.
However, replacement at the factory seams requires the removal of the outer door frame panel. If the damage is limited to the front portion of the inner fender, sectioning is recommended.
* Door Service
The doors are serviced as complete assemblies, or the outer door panels may be serviced separately. Use conventional service procedures when repairing the doors. The sliding side door features bolt-on hinges, while the front doors, the 60/40 side doors, and the rear doors all feature weld on hinges. All side doors have HSLA door beams.
* Door Frame Opening
When sectioning the door frame opening in areas where there is no inner reinforcement, a 100mm backing plate must be used behind the joint to ensure a solid and secure weld. Backing plates can be cut from the unused portion of the door frame opening service part. The specific areas to be sectioned are determined by the extent of damage to the vehicle.
* Roof Panel
The roof panel consists of a single layer outer panel. The original panel is removed by cutting the panel to leave the side weld flanges attached at the “drip rail.” The service panel is not modified for installation other than drilling holes for plug welding. These procedures have been developed to simplify roof panel replacement
* Quarter Panel
The quarter panel service part is supplied as a complete panel and should be replaced as a complete panel only in the event the roof panel and upper side rail are to be replaced.
Sectioning procedures have been developed to allow the replacement of the quarter panel without the removal of the roof panel
* Rear Outer Wheelhouse
Rear outer wheelhouse sectioning procedures have been developed to simplify repair when damage is limited to the outer wheelhouse. In the event the inner wheelhouse is to be replaced, install outer wheelhouse service panel at factory seams
* Rear Door Hinge Pillar
The rear door hinge pillar service part is serviced as an assembly, which consists of the door hinge pillar outer panel and the inner anchor plate reinforcement. The reinforcement includes weld nuts for attaching the rear door bolt-on hinges.
* Floor Rear Extension
The floor rear extension panel is serviced as a single component. The reinforcement structure for the floor panel is a separate part and can only be serviced separately. In most cases, this reinforcement will need to be replaced in the event the floor panel extension is to be replaced
* Magnesium Instrument Panel Support
This component is a one-piece, die-cast magnesium instrument panel support.
It functions as a structural cross-vehicle beam, air-bag support, instrument panel carrier, steering column mounting bracket, and consolidates as many as thirty different steel and plastic components
* Body Dimensions
G Van Body Side
G Van Rear Floor Reinforcement
G Van Rear Door Hinge Pillar
G Van I/P Carrier Mounting Holes
* Frame Dimensions
The redesigned frame is fully boxed with welded joints which provide improved ride quality and greater stability. The body is attached to the frame with six body mounts which are designed to isolate powertrain noise and vibration from the passenger compartment.
* Appendix: Specifications

This manual is available FREE at GM Goodwrench website, we merely collect the information, we are neither affiliated with the author(s), the website and GM brand nor responsible for its content and change of content.

Download Free 1996-2008 GMC Savana/Chevy Express Collision Body Repair Issues Manual.pdf (32 pages pdf file, 1.3 MB).
READ MORE - Download Free 1996-2008 GMC Savana/Chevy Express Collision Body Repair Issues Manual.pdf

Download free 2000-2006 GMC Yukon, GMC Yukon XL/Chevrolet Suburban Full-Size Sport Utility Vehicles (SUVs) Body Repair Manual.pdf

This body repair manual/ collision repair manual of GMC Yukon, Yukon XL and Chevy Suburban Sport Utility Vehicle model year 2000-2006. GMC Yukon is very similar to Chevrolet Tahoe, there’s also a luxurious SUV available from this line up called GMC Yukon Denali XL that unfortunately has many same features offered optionable. During its evolution there are various engines featured in these SUV, such as: 5.7 L 350 TBI V8; 6.5 L Detroit Diesel V8; 5.7 L Vortec 5700 V; 4.8 L Vortec 4800 V8; 5.3 L Vortec 5300 V8; 4.8 L Vortec 4800 V8 and 5.3 L Vortec 5300 V8. Available transmission are: 4-speed 4L60-E automatic and 6-speed 6L80 automatic. Table of contents:

* Door Frame Sectioning
The door frame opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the cab. The door frame can be replaced at factory seams, but requires the removal of the roof panel, windshield and quarter panel.
Sectioning procedures have been developed as a more cost effective alternative to complete replacement. The specific area to be sectioned
* Windshield Pillar Sectioning
* Front Lower Hinge Pillar Sectioning
* Center Pillar Sectioning
* Rear Lock Pillar Sectioning
* Rocker Panel Sectioning
* Door Side Hinge Replacement
* Front Body Side Hinge Replacement
* Front Door Side Hinge Replacement
* Rear Body Side Hinge Replacement
* Rear Door Side Hinge Replacement
* Cargo Body Side Hinge Replacement
* Front Bumper Bracket Replacement 1500 Series
* Front Bumper Bracket Replacement 2500 Series
* Quarter Panel Replacement
The quarter panel may be serviced as a complete panel in the event the roof panel is to be replaced. Sectioning procedures have been developed to simplify the repair. The service part can be replaced by making sectioning cuts at the window pillars
* Rail End Front Crush Cap Replacement
* 2000 Chevrolet/GMC Utilities
* 2000 Chevrolet Suburban/GMC Yukon XL

This manual is available FREE at GM Goodwrench website, we merely collect the information, we are neither affiliated with the author(s), the website and GM brand nor responsible for its content and change of content.

Download free 2000-2006 GMC Yukon, GMC Yukon XL/Chevrolet Suburban Full-Size Sport Utility Vehicles (SUVs) Body Repair Manual.pdf (37 pages pdf file, 1 MB).
READ MORE - Download free 2000-2006 GMC Yukon, GMC Yukon XL/Chevrolet Suburban Full-Size Sport Utility Vehicles (SUVs) Body Repair Manual.pdf

Download free 1999-2004 Pontiac Grand Am and Oldsmobile Alero Collision Body Repair Manual.pdf

Read this body repair manual of 1990-2004 Pontiac Grand Am and Oldsmobile Alero does not discuss their history nor their features, it only consists informations on collision repair manual (some prefer call it body repair manual) on these two cars made by Pontiac and Oldsmobile. In 1999-2004 Oldsmobile has used 3 different engines to accompany Getrag F23 5 speed manual transmission or 4T40-E and 4T45-E automatic transmission, the engines were 2002-2004 2.2 L Ecotec L61 I4, 2.4 L LD9 I4 and 3.4 L LA1 V6. While the Pontiac Grand Am entered its 5th generation while it rolled off the assembly line in 1998. Pontiac uses the powerful 3.4L V6 engine as an added variant, to replace the Ecotec 2.2L as a Grand Am standard engine. Pontiac Grand Am and Oldsmobile Alero shares the same N-Body platform and same FF layout. Grand Am SE, SE1, SE2, GT and GT1 are Pontiac Grand Am variants. Table of contents:

* Panel Identification
* Front End Assembly
* Front Wheelhouse Assembly
* Front Lower Rail Assembly
* Door Frame Opening
* Roof Panel
* Quarter Panel
* Rear Wheelhouse
* Rear Floor Assembly
* Rear Rails
* Rear End Panel Assembly
* Body Dimensions

This manual is available FREE at GM Goodwrench dealer website, we merely collect the information, we are neither affiliated with the author(s), the website, GM and Pontiac brand nor responsible for its content and change of content.

Download free 1999-2004 Pontiac Grand Am and Oldsmobile Alero Collision Body Repair Manual.pdf (40 pages pdf file, 1.8 MB).
READ MORE - Download free 1999-2004 Pontiac Grand Am and Oldsmobile Alero Collision Body Repair Manual.pdf

1997-2003 Pontiac Grand Prix Collision Body Repair Manual Guide.pdf

This body repair manual of the sixth generation of Pontiac Grand Prix model year 1997-2003 powered by 3.1L V6 engine, built with GM’s W body platform and used an FF layout. The Grand Prix was successor of Pontiac Tempest and Pontiac 6000. Table of contents:

* Panel Identification
* Radiator Support Assembly
* Front Upper Rail Assembly
* Front Wheelhouse Assembly
* Front Lower Rail Assembly
* Door Frame Opening
* Door Service
* Roof Panel
* Quarter Panel
* Rear Outer Wheelhouse
* Rear Rail Assembly
* Rear Floor
* Rear End Panel Assembly
* Body Dimensions

This body repair manual/ collision repair information is available FREE at GM Goodwrench website, we merely collect the information, we are neither affiliated with the author(s), the website, Pontiac and GM brand nor responsible for its content and change of content.

Download Free 1997-2003 Pontiac Grand Prix Collision Body Repair Manual Guide.pdf (pdf file, 0.6 MB).
READ MORE - 1997-2003 Pontiac Grand Prix Collision Body Repair Manual Guide.pdf

Download free 2004-2008 GMC Canyon/Chevy Colorado Collision Technical Repair Information Manual.pdf

Read this body repair manual of 2004-2008 GMC Canyon/Chevy Colorado Collision describes on repairing the body of Colorado/Canyon with full illustration including pictures and schemas. GMC Canyon/Chevrolet Colorado offered in both automatic transmission and manual transmission, it also offered either a rear wheel drive (RWD), or four wheel drive (4WD). Mostly equipped with 2.8L LK5 i4 but 3.5L L52 i5 engine also offered along with Z71 package on 4 door versions. The other 2 engines are 2.9L LLVi4 and 3.7L LLR i5 that were offered on the 2007 model onwards. Table of contents:

* Panel Identification
* Dimensions - Body
* Dimensions - Frame (Extended Cab 2WD/4WD)
* Dimensions - Frame (Regular Cab 2WD/4WD)
* Dimensions - Frame (Crew Cab 2WD/4WD)
* Wheelhouse Replacement - Front
* Rail Replacement Front Compartment - Side Upper
* Windshield Frame Pillar Sectioning - Outer
* Roof Panel Replacement - Outer
* Roof Header Panel Replacement - Rear
* Windshield Frame Header Panel Replacement - Front
* Rocker Panel Sectioning - Outer
* Radiator Support Replacement
* Hinge Pillar Sectioning - Front
* Hinge Pillar Reinforcement Sectioning - Front Inner
* Pillar Sectioning - Center
* Pillar Sectioning - Rear
* Door Frame Sectioning - Outer
* Panel Replacement - Rear End
* Battery Tray Replacement
* Pickup Box Panel Replacement - Front
* Pickup Box Assembly Replacement - Side
* Pickup Box Side Panel Replacement - Outer
* Pickup Box Cross Sill Replacement - Rear Pickup Box Tie Down Loop Replacement
* Crossmember Replacement - Transmission (2WD)
* Crossmember Replacement - Transmission (4WD)
* Trailer Hitch Replacement
* Tow Hook Replacement
* Engine Protection Shield Replacement
* SIR Component Views
* SIR Zone Identification Views
* SIR Disabling and Enabling Zones
* SIR Disabling and Enabling Zone 1 - 8

This manual is available FREE at GM Goodwrench website, we merely collect the information, we are neither affiliated with the author(s), the website and GM brand nor responsible for its content and change of content.

Download free 2004-2008 GMC Canyon/Chevy Colorado Collision Technical Repair Information Manual.pdf (109 pages pdf file, 2.5 MB).
READ MORE - Download free 2004-2008 GMC Canyon/Chevy Colorado Collision Technical Repair Information Manual.pdf

Friday, 21 August 2009

Download free 2003 - 2007 Saturn Ion Collision Body Repair Manual.pdf

This body repair manual of 2003 - 2007 Saturn Ion Collision is spanning in over a hundred pages of pdf file and informs various thing regarding collision repair manual or body repair manual of Saturn Ion. The Saturn Ion was sold by Saturn, a division of General Motors and was intended to replace Saturn S Series in 2003. Saturn Ion was a compact car, used the famous GM Delta Platform and during its selling, it had been using at least 3 different engines which were 2.2 L DOHC Ecotec L61 I4 engine, 2.4 L LE5 I4 engine and 2.0 L LSJ supercharged I4 engine. Offered in various transmission from Getrag (F23 and F35 5 speed manual transmission), from Aisin (AF33 Automatic VTi CVT) and 4T45-E Automatic transmission. Later in 2007 the Saturn Ion was replaced by its successor: Saturn Astra. Table of contents:

* Description and Operation [ General Body Construction (Unibody) ~ Door Frame Description ]
* Component Locator [ Panel Identification ~ Structure Identification ~ SIR Zone Identification Views ~ SIR Disabling and Enabling Zone 2 Coupe ~ SIR Disabling and Enabling Zone 2 Sedan ~ SIR Disabling and Enabling Zone 3 ~ Specification ~ Dimensions Body ~ Coupe Side ~ Front End ~ Underbody ~ Engine Compartment ~ Sedan Side ]
* Repair Instructions [ Impact Bar Bracket Replacement - Front Bumper ~ Tie Bar Replacement - Left; Right; Lower ~ Latch Primary Support ~ Battery Tray Replacement ~ Bracket Replacement Front Compartment Side Rail ~ Wheelhouse replacement Front ~ Wheelhouse Extension Replacement Front ~ Rail Replacement Front Compartment Side Upper ~ Rail Sectioning Front Compartment Side Upper ~ Plenum Panel Replacement Upper ~ Plenum Panel Replacement Lower ~ Dash Panel Replacement ~ Cross Bar no 1 Replacement Floor Panel ~ Rail Replacement Front Compartment Front ~ Rail Replacement Front Compartment Front Half ~ Rail Sectioning Front Compartment Front ~ Rail Replacement Front Side Underbody Outer ~ Extension Replacement Front Compartment Side Rail Rear ~ Windshield Frame Reinforcement Replacement Inner Upper ~ Hinge Pillar Body Reinforcement Replacement Front Inner ~ Hinge Pillar Body Replacement Front Inner ~ Hinge Pillar Body Sectioning Front ~ Roof Panel Replacement Outer ~ Windshield Frame Header Panel Replacement Front ~ Rear Window Frame Header Panel Replacement Rear ~ Floor Panel Replacement Center ~ Rocker Panel Replacement Inner ~ Rocker Panel Extension Replacement Inner ~ Rocker Panel Reinforcement Replacement Inner ~ Rocker Panel Reinforcement Sectioning Inner ~ Pillar Lock Front Door Sectioning Outer ~ Pillar Lock Front Door Reinforcement Replacement Outer ~ Pillar Lock Front Door Reinforcement Sectioning Outer ~ Pillar Lock Front Door Replacement Inner ~ Rear Window Reinforcement Replacement Lower Front ~ Rear Window Panel Replacement ~ Rear Window Reinforcement Replacement Rear ~ Pillar Lock Rear Door Replacement Inner ~ Body Side Panel Replacement Outer ~ Rear Compartment Floor Panel Sectioning ~ Wheelhouse Replacement Rear Inner ~ Quarter Panel Sectioning Outer ~ Quarter Panel Replacement Inner ~ Rail Replacement Rear Side Underbody ~ Rail Sectioning Rear Side Underbody ~ Rail Underbody Gusset Replacement Rear ~ Rail Underbody Reinforcement Replacement Rear ~ Body Rear End Panel Replacement ]

This body repair manual is available FREE at GM GoodWrench website, we merely collect the information, we are neither affiliated with the author(s), the website, GM and Saturn brand nor responsible for its content and change of content.

Download free 2003 - 2007 Saturn Ion Collision Body Repair Manual.pdf (186 pages pdf file, 5.9 MB).
READ MORE - Download free 2003 - 2007 Saturn Ion Collision Body Repair Manual.pdf

Wednesday, 5 August 2009

The 5 Collision Repair Information Bulletins for the Toyota Dealers

Read this 5 Collision Repair Information Bulletins that all Toyota Dealers should have, these informations are invaluable for Toyota owners moreover for you that love to pimp your own ride. The download links are located below, along with its short descriptions.

Urethane Adhesive Sealant for Fixed Glass installation.pdf
In order to comply with FMVSS 212 - Windshield Retention and FMVSS 216 - Roof Crush Resistance, the factory uses a urethane adhesive sealant with bonded strength of not less than 40 kilograms per square centimeter or 569 pounds per square inch for certain bonded windshields and rear windows on Toyota vehicles. This Bulletin applies to almost all Toyota model cars: Tercel, Corolla, MR2, Celica, Supra, Camry, Cressida, Van, Land Cruiser, Truck, 4Runner.

2000 Paint & Refinish and Formula Codes.pdf
This Bulletin is especially for you that is looking for Color Codes of your Toyota vehicle, understanding the color name such as White Pearl Mica, Desert Dune Pearl, Lunar Mist Metallic, Liquid Silver Metallic, Black(Lexus Black Onyx), Black Metallic, Black Sand Pearl, Carbon Blue, Riverock Green Mica, Silverstream Op, Graphite Gray Pearl, Thunder Gray Metallic, Cardinal Red, Sunfire Red Pearl, Renaissance Red, Radiant Red, Sandrift Metallic, Napa Burgundy Pearl, Venetian Red Pearl, Baroque Red Metallic, Cinnabar Pearl, Mahogany Pearl, Red Flame Metallic, Vintage Red Pearl, Absolutely Red, Sierra Beige Metallic, Cashmere Beige Metallic, Sable Pearl, Antique Bronze Mica, Burnished Gold Metallic, Desert Bronze Metallic, Autumn Blaze Metallic, Autumn Red Mica, Mystic Gold Metallic, Angora Beige Metallic, Desert Sand Mica, Cognac Brown Mica, Gold Dust Metallic, Solar Yellow, Golden Sand Metallic, Satin Gold Metallic etc., is not an easy job. This manual also describes color codes’ equivalence with 7 major paint manufacturers such as BASF, DuPont, PPG, Sherwin-Williams, Sikkens, Spies-Hecker, ICI Autocolor. You have downloaded the right file if you’d like to repaint your vehicle.

Welding High Strength Steel (H.S.S.) for All Toyota Models.pdf
In today’s body shop environment high strength steel (H.S.S.) body parts are frequently welded during collision damage repairs. Typical uses for H.S.S. are the front cross member, front body outer pillar, floor side member and door side impact protection beam. Because H.S.S. is used in these areas of potential high stress, repairs must be done properly to maintain the structural integrity of the vehicle.

MR2 Spyder Exterior Colors Procedure.pdf
It outlines exterior body color codes used on the 2000 MR2 Spyder. The color code can be found on the certification regulation label, which is located on the drivers side door jamb.

SRS Airbag Component Replacement & Disposal Procedures.pdf
The SRS Airbag system is an important safety feature of Toyota vehicles. It supplements the vehicle s seat belt system by providing additional protection to vehicle occupants in the event of a severe frontal or side collision (if equipped with side airbags). In order to assure correct system operation, it is necessary to replace certain components of the airbag system following a collision. In order to assist technicians in determining which components should be inspected, tested, or replaced, the repair manual information has been organized in the attached matrix and replacement notes.
READ MORE - The 5 Collision Repair Information Bulletins for the Toyota Dealers

Saturday, 1 August 2009

Download Free Toyota MR2 Spyder Collision Service Manual.pdf

This service manual of Toyota MR2 Spyder Collision has been prepared to provide essential information on body panel repair methods (including cutting and welding operations, but excluding painting) for the TOYOTA MR2, Applicable models: ZZW30 series. The service manual Toyota MR2 consists of body repair methods, exploded diagrams and illustrations of the body components and other information relating to body panel replacement such as handling precautions, etc. However, it should be noted that the front fenders of the TOYOTA model is bolted on and require no welding. Table of contents for Toyota MR2 service manual with download links:

* Foreword [ Foreword.pdf ~ Views of this text.pdf ]
* Introduction [ General Repair Instructions.pdf ~ How to use this manual.pdf ~ Proper and Efficient work procedures.pdf ~ Handling Precautions on related components.pdf ~ Precautions for repairing body structure panels.pdf ~ Abvreviations used in this manual.pdf ]
* Body Panel Replacement [ Radiator Upper Side Support (assy) - Replacement.pdf ~ Radiator Upper Side Support (assy) -Replacement 2.pdf ~ Front side member NO.1 Reinforcement (assy) - Replacement.pdf ~ Front Crossmember.pdf ~ Radiator Support.pdf ~ Front Fender Front Apron.pdf ~ Front Apron to cowl side upper member.pdf ~ Front Fender Apron.pdf ~ Front side member.pdf ~ Front side member - replacement.pdf ~ Front Luggage end panel.pdf ~ steering Gear Box Support Member.pdf ~ Front Fender Apron Lower Gusset.pdf ~ Front body Pillar.pdf ~ Front Door Outer Panel.pdf ~ Rocker Outer Panel.pdf ~ Center body outer pillar.pdf ~ Side Panel No.4 Reinforcement.pdf ~ Mounting Bracket.pdf ~ Lower Back Side Panel.pdf ~ Body Lower Back Upper Pannel.pdf ~ Body Lower Back Panel.pdf ~ Frame Rear Upper Crossmember.pdf ~ Rear Floor Side Rear Member.pdf ~ Rear Diagonal Member.pdf ~ Quarter Inner Rear Panel.pdf ~ Side Panel NO.2 Reinforcement.pdf ~ Rear Fender Apron Reinforcement.pdf ~ Wheel Housing Reinforcement.pdf ~ Rear Seat Back hinge Bracket.pdf ~ Quarter Wheel Housing Inner Panel.pdf ~ Rear Floor Side Member.pdf ~ Roof Pannel.pdf ~ General Information.pdf ~ Body Dimension Drawings - Front Luggage Compartment.pdf ~ Body Opening Areas.pdf ~ Engine Compartment.pdf ~ Under Body.pdf ]
* Panel and Coating [ Body Panel Sealing Areas.pdf ~ Body Panel Undercoating Areas.pdf ~ Body Panel Anti-Rust Agent (WAX) Application Areas.pdf ~ Silencer Sheet Installation Areas.pdf ~ Body Panel Anti-Chipping Paint Application Areas.pdf ]
READ MORE - Download Free Toyota MR2 Spyder Collision Service Manual.pdf

Wednesday, 29 July 2009

Download free 1997-2005 Buick Century/Oldsmobile Intrigue Collision Body Repair Manual Issues.pdf

This service manual of 1997-2005 Buick Century will explains steps that must be taken by General Motors’ certified technician on repairing the vehicle’ body of Buick Century and Oldsmobile Intrigue. The fourth generation of Buick Century shares the same layout and platform with Oldsmobile Intrigue and rather hard to distinguished from Buick LeSabre, or Buick Regal. In fact Buick Century and Regal were nearly the same car with small difference only in trim and engine, the Century used less powered engine than the Regal, a 3.1L LG8 V6 engine. The Oldsmobile Intrigue was available in 3 trims which are GX (base), GL (mid-level) and GLS (high-end), among engines that were used by Oldsmobile Intrigue were: DOHC 3.5 Shortstar engine LX5 (6 cyl engine based on GM Northstar V8), and 3.8L L36 V6 engine, 4T65-E automatic transmission also was featured to this car. This owner’s manual is available FREE at GM Goodwrench a GM dealer website, we merely collect the information, we are neither affiliated with the author(s) and GM brand nor responsible for its content and change of content. Table of contents:

* Panel Identification [ 1997 Buick Century ~ 1998 Oldsmobile Intrigue ]
* Radiator Support Assembly
The radiator support can be serviced as a complete assembly. The radiator support is made up of five major components: four upper and one lower.
* Front Upper Rail
The front upper rail is serviced as two components: inner and outer panels. The outer panel is serviced as a sub-assembly which includes an inner reinforcement. After the outer rail has been removed, the inner rail is completely accessible and can be serviced at the factory seams.
* Front Wheelhouse Assembly
The front wheelhouse service panel is serviced as a complete assembly, which includes the upper front strut mounting surface.
The upper strut mounting surface is a dimensionally critical area, and three-dimensional measuring equipment should be used to locate the front wheelhouse assembly. The front apron close-out panel is available and serviced separately.
* Front Lower Rail
Sectioning procedures have been developed to simplify repair of the lower rails, providing the majority of the damage can be returned to factory specifications. This allows the damaged front section to be replaced without performing a full rail replacement. The rails are manufactured with die-marks inboard and outboard to indicate the location for the sectioning joint
* Door Frame Opening
The outer door frame can be replaced as a complete service part or various segments can be sectioned. Complete service part replacement requires the removal of the roof panel.
Sectioning the outer and inner door frame reinforcement is usually much faster and more cost effective. Since the outer door frame is manufactured as a single component, service parts for sectioning must be cut from the service panel and modified as necessary.
* Door Service
The doors may be serviced as complete assemblies, or the outer door panels may be serviced separately. Use conventional service procedures when repairing the doors.
* Roof Panel
The roof panel is serviced as a complete assembly, including the outer panel and the inner reinforcements. The roof panel is attached by a number of welds which must be drilled to remove the outer panel and inner reinforcements for servicing
* Quarter Panel
The quarter panel is serviced as a one piece service assembly which includes the lock pillar and the lower rear quarter close-out panel. Replacement of the quarter panel requires removal of the back glass. Due to the manner in which the quarter panel attaches to the door frame opening, a special sectioning procedure has been developed for improved serviceability.
* Rear Outer Wheelhouse
Although full replacement of the rear outer wheelhouse can be performed, sectioning procedures have been developed for use when damage permits.
* Rear Rail Assembly
The rear rails are available as a sub-assembly. Each consists of an outer panel, two inner reinforcements, and the bumper mounting bracket. The outer panel and rear bumper mounting brackets are also available separately to facilitate sectioning. Additionally, there is a crossbar that connects the two rear rails for added strength and rigidity.
* Rear Floor
The damaged floor is cut along the rearward edge of the rear crossbar, and the service part is cut so that the new floor section extends to the front edge of the rear crossbar. This allows the two sections to overlap where the crossbar is attached.
* Rear End Panel Assembly
The rear end panel is supplied as a complete assembly. Quarter panel extensions attach to the outside corners of the rear end panel. Service for this panel is performed at factory seams.
* Body Dimensions [ Underbody ~ Front ~ Engine Compartment ~ Buick Century Door Frame Opening ~ Oldsmobile Intrigue Door Frame Opening ~ Rear ~ Form and Pierce ~ Buick Century/Oldsmobile Intrigue Hole Identification Chart ]

Download free 1997-2005 Buick Century/Oldsmobile Intrigue Collision Body Repair Manual Issues.pdf (44 pages pdf file, 0.5 MB).
READ MORE - Download free 1997-2005 Buick Century/Oldsmobile Intrigue Collision Body Repair Manual Issues.pdf

Download free 1997-2005 Buick Park Avenue Collision Body Repair Issues Manual.pdf

This repair manual of 1997-2005 Buick Park Avenue Collision covers various information regarding collision repair issues (caution this is not an engine/wiring service manual!). This owner’s manual is available FREE at GM Goodwrench a GM dealer website, we merely collect the information, we are neither affiliated with the author(s) and GM brand nor responsible for its content and change of content. C body (similar to G body used by Buick Riviera) was used by this full size car as its main platform. This car was powered by 3800 Buick V6 engine, and available in automatic transmisison (4-speed 4T65-E). In 2005 GM discontinued the Park Avenue production and was replaced by Buick Lucerne. Table of contents:

* Panel Identification
* Radiator Support Assembly
* Upper Rail Assembly
* Front Wheelhouse Assembly
* Lower Rail Assembly
* Door Service
* Door Frame Opening
* Roof Panel
* Quarter Panel
* Rear Rail Assembly
* Rear Floor
* Rear End Panel
* Body Dimensions

Download free 1997-2005 Buick Park Avenue Collision Body Repair Issues Manual.pdf (32 pages pdf file, 0.5 MB).
READ MORE - Download free 1997-2005 Buick Park Avenue Collision Body Repair Issues Manual.pdf

Monday, 13 July 2009

Download free Volkswagen Collision Service Manual Guide.pdf

This service manual guide ov Volkswagen Collision applies to the following VW models (1952 to date): VW Delivery Van (Models: 211, 213, 215), VW Micro Bus (Models: 221, 223, 225), VW Kombi (Models: 231, 233, 235), VW Micro Bus De Luxe (Models: 241, 251), VW Pick-up (Models: 261, 263, 265), VW Pick-up Double Cabin (Models: 265, 267), and VW Micro Bus (Models: 281, 285). This service manual guide estimates repair process time and price after collision, parts covered are:

Front - Rear Bumper, Frame, Front Suspension, Steering, Transmission & Supports, Rear Suspension, Wheels and Brakes Exhaust and Heater, Fuel System, Cooling and Engine, Electrical, Front Body, Body Side, Cab Door, Loading door, LID Rear Loading, LID Engine Compartment, Roof and Rear Body, Glass, Mouldings, Sliding Roof, Seat Clamps.

Download free Volkswagen Collision Service Manual Guide.pdf (16 pages pdf file, 1.15 MB).
READ MORE - Download free Volkswagen Collision Service Manual Guide.pdf

Monday, 30 March 2009

Free Download 1996-2004 Acura 3.5RL Service Manual & Body Repair Manual.pdf

1999 Acura 3.5RL
The Acura 3.5RL (RL stands for Refine Luxury) was an executive car built in Saitama Japan and also called as Honda Legend. It internally known and KA9 and is powered by 3.5L V6/C35A1 SOHC Sequential Multiport Fuel Injected engine and uses M5DA 4 speed automatic transmission. The Acura RL was intended to replace its predecessor, the Acura Legend.

This zipped material consists 2 manual, a Acura 3.5RL Service Manual and Acura 3.5RL Collision/Body Repair Manual, specially for Model Year 1996-2004 (first generation of Acura 3.5RL)...read more articles or download free 1996-2004 Acura 3.5RL Service Manual & Body Repair Manual.pdf
READ MORE - Free Download 1996-2004 Acura 3.5RL Service Manual & Body Repair Manual.pdf